Search by Vehicle

Polaris Ranger Crew XP 1000 2.2" X0-IFP Series Rear Exit Shocks (2014-2017)

$718.00
In stock
SKU
K75-PL06120-IFP

ZBROZ 2.2” X0-IFP Series Rear EXIT Shocks for the 2014-2017 Polaris Ranger Includes Stock Replacement Rear Upper Arms and helps you get the ride quality and performance you need and gain up-to 2” of true suspension lift by simply bolting them on. Take your ride to the next level of driving performance and comfort.
  • ZBROZ 2.2” X0-IFP Series Rear EXIT Shocks for the 2014-2017 Polaris Ranger Includes Stock Replacement Rear Upper Arms and helps you get the ride quality and performance you need and gain up-to 2” of true suspension lift by simply bolting them on. Take your ride to the next level of driving performance and comfort.

    FEATURES INCLUDE: • Includes Stock Replacement Rear Upper Arms • Direct Bolt-on Replacement • Adds up-to 2” of True Suspension Lift • Billet Constructions • 2.2” O.D. Shock body • 2.2“O.D. Piggy back reservoir • Performance High-Flow Piston • Precisely valved and tuned • 5/8” Chrome Shaft • PTFE Lined Spherical Bearings • Progressive Closed Cellular Bump Stop • Shot Peened & Preset Chrome Silicone Wire Springs • Dual Rate Spring Rate Tuning • Adjustable Billet Crossover Rings • Billet Compression Adjuster • MADE IN THE USA

  • SAEJ2492 Warning: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than that of factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or roll-over during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner’s manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.

    Have a certified mechanic do it for you!

  • 2014-2017 Polaris Ranger comes with stock replacement rear uppers arms to allow for extra shock spring clearance.

    All EXIT SHOCKS are serviceable for years of reliable use. For service contact your local Zbroz Racing Dealer or send your shocks to us for full service. Zbroz Racing recommends that you service EXIT SHOCKS every 1,500 miles or every 24 months.

    All EXIT SHOCKS are custom-built, valved, and tuned to applications. Please allow a 2-4 week build time.

    Shipping: Zbroz Racing products are fulfilled per order on a first come first serve basis. We strive to fulfil all orders within 48 hours. Should a backorder condition result you will be notified and we will fulfil your order as quickly as possible. If placing an order for a Zbroz Racing Exit Shock product. Please know they are custom built to order and depending upon demand can take 4 weeks or longer to supply. Zbroz Racing products are built to last and exceed your expectations with quality, performance and durability in mind. Should you have any questions or concerns please contact us at customerservice@zbrozracing.com. Thanks again for your order and we look forward serving your off-road needs.


Quick Overview
ZBROZ 2.2” X0-IFP Series Rear EXIT Shocks for the 2014-2017 Polaris Ranger Includes Stock Replacement Rear Upper Arms and helps you get the ride quality and performance you need and gain up-to 2” of true suspension lift by simply bolting them on. Take your ride to the next level of driving performance and comfort.
Details

ZBROZ 2.2” X0-IFP Series Rear EXIT Shocks for the 2014-2017 Polaris Ranger Includes Stock Replacement Rear Upper Arms and helps you get the ride quality and performance you need and gain up-to 2” of true suspension lift by simply bolting them on. Take your ride to the next level of driving performance and comfort.

FEATURES INCLUDE: • Includes Stock Replacement Rear Upper Arms • Direct Bolt-on Replacement • Adds up-to 2” of True Suspension Lift • Billet Constructions • 2.2” O.D. Shock body • 2.2“O.D. Piggy back reservoir • Performance High-Flow Piston • Precisely valved and tuned • 5/8” Chrome Shaft • PTFE Lined Spherical Bearings • Progressive Closed Cellular Bump Stop • Shot Peened & Preset Chrome Silicone Wire Springs • Dual Rate Spring Rate Tuning • Adjustable Billet Crossover Rings • Billet Compression Adjuster • MADE IN THE USA

Installation

SAEJ2492 Warning: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than that of factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or roll-over during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner’s manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.

Have a certified mechanic do it for you!

Additional Information

2014-2017 Polaris Ranger comes with stock replacement rear uppers arms to allow for extra shock spring clearance.

All EXIT SHOCKS are serviceable for years of reliable use. For service contact your local Zbroz Racing Dealer or send your shocks to us for full service. Zbroz Racing recommends that you service EXIT SHOCKS every 1,500 miles or every 24 months.

All EXIT SHOCKS are custom-built, valved, and tuned to applications. Please allow a 2-4 week build time.

Shipping: Zbroz Racing products are fulfilled per order on a first come first serve basis. We strive to fulfil all orders within 48 hours. Should a backorder condition result you will be notified and we will fulfil your order as quickly as possible. If placing an order for a Zbroz Racing Exit Shock product. Please know they are custom built to order and depending upon demand can take 4 weeks or longer to supply. Zbroz Racing products are built to last and exceed your expectations with quality, performance and durability in mind. Should you have any questions or concerns please contact us at customerservice@zbrozracing.com. Thanks again for your order and we look forward serving your off-road needs.