Translate
Can-Am Defender XT 2.2" X1 Series Rear Remote Exit Shocks (2019-2022)
Get the most out of your UTV with ZBROZ 2.2" X1 Series Rear Remote EXIT Shocks! Designed to give you superior performance over all factory options, Exit Shocks allow for quick compression and rebound adjustments at a turn of a knob no tools required- providing improved comfort, control, ride height gain, and stability as you tackle any terrain. Take your riding experience to new heights today with Exit Shocks!
Vehicle Applications:
- Can-Am Defender XT (2019-2022)
Get the most out of your UTV with ZBROZ 2.2" X1 Series Rear Remote EXIT Shocks! Designed to give you superior performance over all factory options, Exit Shocks allow for quick compression and rebound adjustments at a turn of a knob no tools required- providing improved comfort, control, ride height gain, and stability as you tackle any terrain. Take your riding experience to new heights today with Exit Shocks!
Vehicle Applications:
- Can-Am Defender XT (2019-2022)
The 2.2” X1 Series Rear EXIT Shocks feature a billet body construction to keep your shocks running cool when you need them most. We added a performance high-flow piston and precise valve and tune every single shock off the line to meet your expectation. With direct bolt-on capabilities, the X1 Series EXIT Shocks are easily tuned for your specific riding style and terrain.
Each X1 Series EXIT Shock comes with compression adjustability in our billet-designed knobs. Now you can dial in your shocks to match the terrain and your riding style. This means you can easily adjust your EXIT Shocks tool-free at the turn of a dial.
X1 EXIT Shocks come with a dual-rate spring setup including our adjustable billet crossover rings. This allows you to set your crossover point to your liking and allows for a true dual-rate setup.
FEATURES INCLUDE:
• Direct Bolt-on Replacement
• Adds up to 2” of True Suspension Lift
• Billet Constructions
• 2.2” O.D. Shock body
• 2.2“O.D. Piggyback reservoir
• Performance High-Flow Piston
• Precisely valved and tuned
• 5/8” Chrome Shaft
• PTFE Lined Spherical Bearings
• Progressive Closed Cellular Bump Stop
• Shot Peened & Preset Chrome Silicone Wire Springs
• Dual Rate Spring Rate Tuning
• Adjustable Billet Crossover Rings
• Billet Compression Adjuster
• MADE IN THE USA
Do it yourself!
Please read Instructions thoroughly and completely before beginning installation. Installation by a certified mechanic is recommended. ZBROZ Racing is NOT responsible for any damage or failure resulting from improper installation.
Download Pdf InstructionsSAEJ2492 Warning: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than that of factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or roll-over during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner’s manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.
Have a certified mechanic do it for you!
The Rear Remote 2.2” X1 Series EXIT Shocks feature a billet body construction to keep your shocks running cool when you need them most. We added a performance high-flow piston and precise valve and tune every single shock off the line to meet your expectation. With direct bolt-on capabilities, the X1 Series EXIT Shocks are easily tuned for your specific riding style and terrain.
Each X1 Series EXIT Shock comes with compression adjustability in our billet-designed knobs. Now you can dial in your shocks to match the terrain and your riding style. This means you can easily adjust your EXIT Shocks tool-free at the turn of a dial.
FEATURES INCLUDE:
• Direct Bolt-on Replacement
• Adds up to 2” of True Suspension Lift
• Billet Constructions
• 2.2” O.D. Shock body
• 2.2“O.D. Piggyback reservoir
• Performance High-Flow Piston
• Precisely valved and tuned
• 5/8” Chrome Shaft
• PTFE Lined Spherical Bearings
• Progressive Closed Cellular Bump Stop
• Shot Peened & Preset Chrome Silicone Wire Springs
• Single-Rate Spring Rate Tuning
• Billet Compression Adjuster
• MADE IN THE USA