Polaris RZR XP 1000/Turbo | XP 4 1000/Turbo | RS1 HD Pro Lower Radius Rods (2017-2023)

As low as $325.00

In stock

Only %1 left

SKU

K45-0663

Be the first to review this product

Our ZBROZ HD Pro Lower Radius Rods have broke the rules over a decade ago in ground clearance design and proven durability. We built them to exceed the limits of your RZR and add inches of ground clearance all the way to the hub while protecting your axles. Don’t leave home without them!
We kept the trail rider and rock crawler in mind by providing a simple bolt-on system to easily upgrade your ride with high strength durability. Built with 1.25" OD Chromoly Steel, precision welded and swaged (swedged) towards each end for strength and durability. These HD Pro Lower Radius Rods feature Teflon lined Heim Joints rated at a massive 18,000lb Load and maximum ground clearance.

Pro Max Upper Radius Rods are Camber Adjustable at the Heim Joint ends so that you can setup your RZRs Camber exactly as you need it.
*We set our HD Pro Lower Radius Rods at zero degrees camber from the production line. Always use a medium thread locker glue when making adjustments to your Heim Joints.

Features Include:
• Stronger than OEM
• Maximum ground clearance design
• Camber Adjustable
• Teflon Lined Heavy Duty Heim Joints
• Direct Bolt-on Installation, No Modifications Required
• Compatible with OEM Upper Radius Rods
• Made In The USA
Write Your Own Review

You're reviewing:Polaris RZR XP 1000/Turbo | XP 4 1000/Turbo | RS1 HD Pro Lower Radius Rods (2017-2023)

Nickname
Summary
Review
SAEJ2492 Warning: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than that of factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or roll-over during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner’s manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.

Have a certified mechanic do it for you!
Location *
Location
Distributor Name
Zbroz Racing products are fulfilled per order on a first come first serve basis. We strive to fulfil all orders within 48 hours. Should a backorder condition result you will be notified and we will fulfil your order as quickly as possible. If placing an order for a Zbroz Racing Exit Shock product. Please know they are custom built to order and depending upon demand can take 4 weeks or longer to supply. Zbroz Racing products are built to last and exceed your expectations with quality, performance and durability in mind. Should you have any questions or concerns please contact us at [email protected] Thanks again for your order and we look forward serving your off-road needs.

Quick Overview

Details

Our ZBROZ HD Pro Lower Radius Rods have broke the rules over a decade ago in ground clearance design and proven durability. We built them to exceed the limits of your RZR and add inches of ground clearance all the way to the hub while protecting your axles. Don’t leave home without them!
We kept the trail rider and rock crawler in mind by providing a simple bolt-on system to easily upgrade your ride with high strength durability. Built with 1.25" OD Chromoly Steel, precision welded and swaged (swedged) towards each end for strength and durability. These HD Pro Lower Radius Rods feature Teflon lined Heim Joints rated at a massive 18,000lb Load and maximum ground clearance.

Pro Max Upper Radius Rods are Camber Adjustable at the Heim Joint ends so that you can setup your RZRs Camber exactly as you need it.
*We set our HD Pro Lower Radius Rods at zero degrees camber from the production line. Always use a medium thread locker glue when making adjustments to your Heim Joints.

Features Include:

• Stronger than OEM
• Maximum ground clearance design
• Camber Adjustable
• Teflon Lined Heavy Duty Heim Joints
• Direct Bolt-on Installation, No Modifications Required
• Compatible with OEM Upper Radius Rods
• Made In The USA

Reviews

Write Your Own Review

Installation

SAEJ2492 Warning: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than that of factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or roll-over during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner’s manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.

Have a certified mechanic do it for you!

Additional Information

Zbroz Racing products are fulfilled per order on a first come first serve basis. We strive to fulfil all orders within 48 hours. Should a backorder condition result you will be notified and we will fulfil your order as quickly as possible. If placing an order for a Zbroz Racing Exit Shock product. Please know they are custom built to order and depending upon demand can take 4 weeks or longer to supply. Zbroz Racing products are built to last and exceed your expectations with quality, performance and durability in mind. Should you have any questions or concerns please contact us at [email protected] Thanks again for your order and we look forward serving your off-road needs.